80PK-27

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe

Features and Specifications

• 80PK-27 Industrial Surface Probe replaces the 80PK-7
• Heavy duty industrial grade probe for flat or slightly curved surfaces
• Low conductivity stainless steel housing minimizes thermal shunting
• Measurement range: -127° to 600°C (-196° to 1112°F)
• Probe tip max temperature: 600 °C (1112 °F)
• 8-inch probe made from 300 stainless steel
• Max voltage rating at probe tip: 24 V ac rms, or 60 V dc
• Conductors: Type-K / AWG #24 stranded (7 strands of #32)
• Handle: Material: Hytrel
• Connector type: Mini-thermocouple with 0.792 mm (0.312-in) pin spacing
• Cable length: 40 inches (1 meter)

Compatible With

• 51 II Handheld Digital Probe Thermometer
• 52 II Dual Probe Digital Thermometer
• 53 II Temperature Logging Digital Thermometer
• 54 II B Data Logging Thermometer with Dual Input
• 561 HVAC Infrared and Contact Thermometer
• 566 Thermal Gun Infrared and Contact Thermometer
• 568 Contact and Infrared Temperature Gun
• 572-2 High Temperature Infrared Thermometer
• 714B Thermocouple Calibrator
• 724 Temperature Calibrator
• 1587 FC Insulation Multimeter
• 115 Field Technicians Digital Multimeter
• 116 Digital HVAC Multimeter
• 117 Electrician's Multimeter with Non-Contact Voltage
• 175 True-RMS Digital Multimeter
• 177 True-RMS Digital Multimeter
• 179 True-RMS Digital Multimeter
• 233 Remote Display Digital Multimeter
• 27 II Rugged Digital Multimeter
• 28 II Rugged Digital Multimeter
• 83V Average Responding Industrial Multimeter
• 87V Industrial Multimeter
• 88V Deluxe Automotive Multimeter
• 28 II Ex Intrinsically Safe True RMS Digital Multimeter
• 87V MAX True-rms Digital Multimeter

The Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe is designed for reliably measuring temperatures to 600 °C (1112 °F) on flat or slightly convex surfaces, while retaining a long service life. The 80PK-27 is designed to be compatible with any temperature measuring instrument that accepts Type-K thermocouples, has a miniature thermocouple connector, and has cold reference junction compensation.

Note: A lowering of the temperature at the contact point is less likely (and contact response time is quicker) on clean, polished, thermally conductive surfaces than on materials with low thermal conductivity, such as plastic or rough, contaminated surfaces. To obtain the best thermal contact and performance, the stainless steel ring must make full and firm contact with the measurement surface.

What's in the Box

• 80PK-27 Industrial Surface Temperature Probe

All 80PK Series SureGrip Probes Listed are for Type-K Instruments (Model Pictures and Descriptions Below) The innovative SureGrip design from Fluke is now available in select temperature probes. The soft rubber handle combined with a new ergonomic shape is so comfortable to hold that you'll forget about the probe and focus on the measurement. All SureGrip probes have an improved, more flexible strain relief for a long life.

80PK-22 SureGrip Immersion Probe (replaces 80PK-2A) For use in liquids or gels, use also for general purpose measurement. Measurement range: -40° to 1090°C (-40° to 1994°F) 8.375 inch probe made from Alloy 600
80PK-24 SureGrip Air Probe (replaces 80PK-4A) Perforated baffle around the measurement bead for air and non-caustic gas measurements. Measurement range: -40° to 816°C (-40° to 1500.8°F) 8.5 inch probe made from Inconel
80PK-25 SureGrip Piercing Probe (replaces 80PK-5A) For general food service applications; designed for use in soft or semi-hard materials. Measurement range: -40° to 260°C (-40° to 500°F) Soft rubber handle can be cleaned with soap and water 4-inch probe made from 316 stainless steel
80PK-26 SureGrip Tapered Probe (replaces 80PK-6A) Use for general purpose surface and air measurements. Measurement range: -40° to 816°C (-40° to 1500°F) 8 inch probe made from 304 stainless steel
80PK-1 General Purpose Bead Probe Good accuracy and fast response. Not for liquid immersion. -40 to 260°C (-40 to 500°F)
80PK-3A Flat Surface Probe For measuring flat or slightly convex surfaces Exposed junction for direct surface contact. 0 to 260°C (32 to 500°F)
80PK-8 Pipe Clamp Probe For pipe surfaces from 0.25-inch (6 mm) to 1.375-inch (35 mm) diameter. Spring-action jaw. -29 to 149°C (-20 to 300°F)
80PK-9 General Purpose Probe Surface probe and for insertion into air and non-caustic gas environments. Probe made of 304 stainless steel. -40 to 260°C (-40 to 500°F)
80PK-10 Large Pipe Clamp Probe For large pipe surfaces from 1.25-inch (32 mm) to 2.5-inch (64 mm) diameter. Spring-action jaw. -29 to 149°C (-20 to 300°F)
80PK-EXT Extension Wire Kit For extending and repairing K-type thermocouple wires. Includes 3 meters (approx. 9 feet) of thermocouple wire and 1 pair of male/female mini-connectors. Max. to 260°C (500°F)
80PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe Use with any temperature-measuring instrument designed to accept Type-K thermocouples -30º C to 150ºC Max. to 150°C (302°F