P7720 TriMode Probe Specs:

• 20 GHz High bandwidth for signal fidelity
  Differential and single ended modes only. Bandwidth is 19 GHz in the common mode setting.

P7720 Series:

Specs:

• Attenuation – Solder-in tips 4x; Browser 10x; Coaxial input (SMA) adapter 0.7x/1.3x/2.7x/5x/10x
• Low frequency input capacitance (differential, typical) – Solder-in tips 0.4 pF; Browser 0.23 pF at 50 mil spacing; 0.22 pF at 200 mil spacing
• CMRR, typical – DC 34 dB; 50 MHz 34 dB; 1 GHz 24 dB; 10 GHz 14 dB; 20 GHz 10 dB
• Cable length – 1.3 m (4.3 feet)
• The P7700 series probes are compatible with the following oscilloscopes –
  DPO70000C series, DSA70000C series, MSO70000C series, DPO70000D series, DSA70000D series, DPO70000DX series, MSO70000DX series, MSO70000SX series

Highlights:

• TriMode Probe – One setup, three measurements without adjusting probe tip connections
  • Differential
  • Single ended
  • Common mode (Requires only one probe vs. conventional probing techniques)
• Easy to connect TekFlex Connector technology
  • Pinch-to-Open accessory connector
  • Versatile Connectivity - solder down tips, optional browser for handheld or fixtured probing, and coaxial input (SMA adapter)
  • Probe cable and solder down tips operate over an extended temperature range
• TekConnect Interface

All probes include the following items: Accessory kit, Manual, Three solder-in tips, Magnetic cable holder for strain relief, Certificate of traceable calibration, Calibration data report, One-year warranty

With TriMode probing one probe setup makes differential, single ended, and common mode measurements accurately. This unique capability allows you to work more effectively and efficiently, switching between differential, single ended and common mode measurements without moving the probe's connection points.

P7700 Series TriMode probes use the new TekFlex connector technology that combines a high speed signal path with power and communication support for an active buffer tip in a single, easy to connect accessory connector. The TekFlex connector has a pinch-to-open design that when open requires minimal force to attach an accessory tip. When the TekFlex connector is closed, it provides a secure connection to the accessory to avoid accidental disconnections.

With the TekFlex connector, the P7700 series probes offer a set of active probe tips with the probe's buffer amplifier only millimeters from the input connections. The short signal path enabled with the active tips provides high fidelity and a high impedance input. It also minimizes signal loss, capacitance, and additive noise.

Applications:

• DDR/LPDDR memory verification
• High speed serial bus debugging
• MIPI D-PHY/C-PHY/M-PHY conformance tests
• HDMI and DisplayPort compliance tests