T3PS36031P High-precision DC Power Supply

Specs:

• Output Voltage: 36 V
• Output Current: 3 A
• Output Power: 108 W

Features:

• Preset memory function
• Output ON/OFF delay function
• CV, CC priority start function (prevents overshoot with output ON)
• Adjustable voltage and current slew rates.
• Bleeder circuit ON/OFF setting (to prevent over-discharging of batteries)
• OVP, OCP, AC Alarm and OTP protection
• Supports test sequence
• Web server monitoring and control (The function is activated when connecting to LAN Interface)
• Analog monitor output
• Remote sensing to compensate for voltage drop in load leads
• Support K type thermocouple temperature measurement
• With 4 measuring currents and Manual / Auto shift function
• Built-in USB, RS-232/485 and LAN interface
• External analog control function

Standard Accessories:

• 1 x Test leads for T3PS20051P/T3PS36031P (Binding Posts Terminal), 1 m, 10 A
• 1 x Short Bar (Binding Posts Terminal)
• 1 x Test leads for T3PS20051P/T3PS36031P (European Type Jack Terminal), 1 m, 10 A
• 1 x Test leads for T3PS100011P (European Type Jack Terminal), 1 m, 3 A
• 1 x Ground lead for European Type Jack Terminal
• 3 x Power Cord

The T3PS series has four current levels and two voltage levels to provide users with high-precision measurements. The Data Logger function can be used for long-term measurement and recording of IoT devices, portable devices, wearable devices, and sensor components. The recorded data can be stored via USB interface.

In order to satisfy users’ low-power measurement applications, Teledyne Test Tools has introduced the T3PS Series with current measurement resolutions (0.1 µA, 1 µA, 10 µA, 0.1 mA) and voltage measurement resolutions (0.1 mV, 1 mV) to provide power for portable devices and wearable devices

The T3PS series provides the Test Sequence function to allow users to arbitrarily define output waveforms. Different waveform parameters such as rise/fall time can be directly set and edited either via computer remotely, on the front panel or the CSV file. In addition, the OCP Delay function of the T3PS series allows users to flexibly adjust the over-current protection parameters based on DUT requirements.

The T3PS Series also supports temperature measurement using a K Type Thermocouple, the temperature range can be measured from - 200 degrees Celsius to +1372 degrees Celsius. Standard communication interfaces include USB, LAN, RS-232 and RS-485.