RT-ZD10 Active Differential Broadband Probe

Features:

• 1 GHz, 1 Megohm, 0.6pF, 5 Vpeak
• 10:1 Attenuation
• 100:1, 1 Megohm, .3 pF with RT-ZA15* external attenuator (included with RT-ZD10)
• R&S probe interface
• R&S ProbeMeter & micro button
• 1.2m Cable
• Includes accessories

Benefits:

• Confidently capture differential signals
• High common mode rejection ratio ensures accuracy with large common mode changes
• Signals under test retains high fidelity with thanks to capacitive probe loading

Differential probes can be used for single-ended and differential applications. They are equipped with two high-impedance inputs and can measure the voltage between any two test points. Unlike using single-ended probes, there is no need to ensure that one of the test points is always at ground potential.

The comprehensive accessory set allows this probe to be connected to a wide variety of devices under test (DUT). Provided with special features such as the R&S ProbeMeter and the micro button, the R&S RT‑ZD10/20/30 is designed to meet tomorrow's challenges in probing.

External Attenuator
The R&S RT-ZD10 active differential probe, together with the included R&S *RT-ZA15 external attenuator, permits the measurement of voltages up to ±60 V DC/±42.4 V AC (peak) at a bandwidth of 1 GHz.

Micro Button
The micro button at the probe head can remotely control different functions on the base unit. The assigned function is configured via the base unit.

R&S ProbeMeter
The R&S ProbeMeter measures the DC voltage of the input signal directly at the probe tip. It provides a continuous high-precision DC voltage measurement that is independent of the settings of the oscilloscope and runs in parallel to the time domain measurement. If activated on the base unit, the measured value is displayed on the screen of the Rohde & Schwarz oscilloscope.

Accessories Supplied:

• 10 - Signal pin, solder-in
• 4 - Signal pin, variable spacing
• 1 - Browser adapter
• 2 - Adapter, square pin
• 1 ea - Flex adapter, solder-in (4cm/1.6in & 10cm/3.9in)
• 1 ea - Flex adapter, square pin (4cm/1.6in & 10cm/3.9in)
• 2 - Lead (6cm/2.4in)
• 1 - Lead (15cm/5.9in)
• 2 - Mini clip
• 2 - Micro clip
• 1 - Marker band kit
• 1 - External attenuator (only with R&S RT‑ZD10)
• 1 - Adjustment tool (only with R&S RT‑ZD10)
• 1 - Carrying case with foam inlay