Multi-Range DC Power Supply, 3 Outputs, 3x35V/3A, 315W - No Interfaces

The MX100T differs from most other triple output power supplies in having three outputs of equal power, each with the ability to provide 0 to 35V at 0 to 3A. Each output features simultaneous high-resolution metering, switchable remote sense and an individual output switch.

In this base model, the 'T' suffix indicates a 'triple' output power supply (MX100TP as a remote programmable version). The 100 refers to the nominal channel power, however, because of power-sharing and range switching, the MX100T is capable of up to 210W from a single channel.

MX100T Series Features:

• 3 high-performance outputs
• Total power of 315 watts in a highly compact package
• Range switching gives up to 70 volts and up to 6 amps
• 12 range combinations for maximum flexibility
• Up to 210 watts from a single output
• Low output noise and ripple via linear final regulation
• High-setting resolution of 1mV and 0.1mA (output 1)
• Variable OVP and OCP trips on all outputs
• 50 setting memories per output + 50 linked memories
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense on all outputs
• Graphic LCD provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• Individual or combined output on/off control with programmable delay sequencing.
• Front panel locking with optional pass-code protection
• 3U half-rack case for bench or rack mounting
• RS-232, USB and LAN (LXI) interfaces (MX100TP)

The MX Series represents a new generation of multiple output laboratory power supplies from Aim-TTi. Offering high power within a compact format they use ranged-switched mixed-mode regulation with display and control via a backlit graphic LCD and soft keys. Every output has full functionality including fully variable voltage and current, CV/CI operation, individually switched output, and selectable remote sense.

Mixed-mode regulation
To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response.

Range switching and power control
To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide 16V/6A as an alternative to 35V/3A, while output three can provide 70V/1.5A. When higher power is required, outputs two and three can be combined internally to provide up to 210 watts as either 35V/6A or 70V/3A from a single output.