Rohde & Schwarz RT-ZZ80 10:1 8 GHz Passive Oscilloscope Probe

• Bandwidth: 8 Ghz
• Maximum voltage: 20 V (RMS) max. input voltage
• 10:1 attenuation factor
• Input impedance: 500 Ohm / 0.3 pF
• 1.2m Cable
• SMA-BNC adapter included
• Includes accessories

The R&S® RT-ZZ80 8 GHz probe provides an attenuation factor of 10:1 at an input impedance of 500 Ω || 0.3 pF. Its SMA plug is connected to the oscilloscope via the provided SMA-BNC adapter. The probe can be easily selected as a predefined probe from the R&S® RTO oscilloscope menu.

Transmission line probes like R&S RT-ZZ80 are a special type of passive probes. They are based on an impedance-controlled microwave cable (transmission line), which is terminated into a 50 Ω input impedance of the measuring instrument.

The R&S RT-ZZ80 has a wide dynamic range. High input levels up to 20 V (RMS) can be measured without distortion. The low inherent noise enables the measurement of small input signals.

The comprehensive accessory set allows connection to a wide variety of devices under test (DUT) without impairing the very high bandwidth, short rise time and the low input capacitance of the R&S RT-ZZ80.

• R&S RT-ZZ80 transmission line probe
• Carrying case
• Accessory boxes
• User manual
• Data sheet
• Calibration certificate
• Documentation of calibration values (if ordered)
• Safety instructions for oscilloscopes and accessories (multilingual)
• 50x Signal pin, solder in
• 2x Signal pin
• 2x Signal adapter, square pin
• 10x Ground pin, solder in
• 2x Ground pin, pogo
• 2x Ground adapter, square pin
• R&S RT-ZA10 SMA (female) to BNC (male) adapter
• Marker band kit
• Carrying case with foam inlay