PQ213 (9402-05 CDR) PC USB Sampler-Extended Real-Time Oscilloscope

Specs:

• DC to 5 GHz Bandwidth
• 2 Channel (All channels are identical and digitized simultaneously)
• ADC resolution 12 bits
• Maximum sampling rate: Real-time 500 MS/s per channel simultaneouly
  Random Up to 1 TS/s or 1 ps trigger placement resolution
• Clock and data recovery (CDR)

Kit Contains:

• PicoScope 9400 Series sampler-extended real-time oscilloscope (SXRTO)
• PicoSample 4 software supplied on USB stick
• Free software updates from picotech.com
• Quick start guide
• 12 V power supply, IEC inlet
• 3 x localized IEC mains leads
• USB cable, 1.8 m
• PicoWrench N / SMA / PC3.5 / K combination wrench
• Storage / carry case
• LAN cable, 1 m (9404 models only)

PicoScope 9400 Series Overview:

The PicoScope 9400 Series sampler-extended real-time oscilloscopes (SXRTOs) have two or four high-bandwidth 50 Ohm input channels with market-leading ADC, timing and display resolutions for accurately measuring and visualizing high-speed analog and data signals. They are ideal for capturing pulse and step transitions down to 22 ps, impulse down to 45 ps, and clocks and data eyes to 11 Gb/s (with optional 5 or 8 Gb/s clock recovery).

• The PicoScope SXRTOs offer random sampling, which can readily analyze high-bandwidth applications that involve repetitive signals or clock-related streams.
• The SXRTO is fast: random sampling, persistence displays and statistics all build quickly.
• The PicoScope 9400 Series has a built-in internal trigger on every channel, with pre-trigger random sampling to well above the Nyquist (real-time) sampling rate. Bandwidth is up to 16 GHz behind a 50 Ohm SMA(f) input, and three acquisition modes—real-time, random and roll—all capture at 12-bit resolution into a shared memory of up to 250 kS.
• The touch-compatible PicoSample 4 software is derived from Pico's existing, and highly regarded, PicoSample 3 sampling oscilloscope software, which embodies over ten years of development, customer feedback and optimization.
• The display can be resized to fit any window and fully utilize available display resolution, 4K and even larger or across multiple monitors. Four independent zoom channels can show you different views of your data down to a resolution of 0.4 ps. Most of the controls and status panels can be shown or hidden according to your application, allowing you to make optimal use of the display area.
• A 2.5 GHz direct trigger can be driven from any input channel, and a built-in divider can extend the off-channel trigger bandwidth to 5 GHz. On the 16 GHz models a further external prescaled trigger input allows stable trigger from signals of up to 16 GHz bandwidth and, from the internal triggers, recovered clock trigger is available (if optional clock recovery is fitted) at up to 8 Gb/s. With this option, recovered clock and data are both available on SMA outputs on the rear panel.
• The price you pay for your PicoScope SXRTO is the price you pay for everything – Pico doesn’t charge for software features or updates.

Typical Applications:

• Telecom and radar test, service and manufacturing
• Optical fiber, transceiver and laser testing (optical to electrical conversion not included)
• RF, microwave and gigabit digital system measurements
• Signal, eye, pulse and impulse characterization
• Precision timing and phase analysis
• Digital system design and characterization
• Eye diagram, mask and limits test up to 8 Gb/s
• Clock and data recovery at up to 8 Gb/s
• Ethernet, HDMI 1, PCI, SATA and USB 2.0
• Semiconductor characterization
• Signal, data and pulse/impulse integrity and pre-compliance testing