RT-ZS10L Single-Ended Active Probe

Features:

• Attenuation: 10:1
• Bandwidth: 1 GHz
• Max. Voltage: ±8 V
• Input Impedance: 1 Megohm || 0.9 pF
• BNC interface , 50 Ohm output*

High signal fidelity with active probes
Rohde&Schwarz single-ended active probes accurately measure ground-referenced signals. They precisely measure both high-speed and low-frequency signals for which it is critical that the probe impedance places only a minimal load on the test point.

Wide dynamic range with additional offset compensation
In addition to their wide dynamic range, RS single-ended active probes also offer an offset compensation. As a result, the DC component of the measured signal can be compensated so that the signal components of interest are displayed on the oscilloscope at maximum resolution.

Low offset and gain errors, minimal temperature drift
The minimal gain drift coupled with the offset compensation permits precise measurements – even over extended periods of time and at varying temperatures. Frequent compensation during the measurement is no longer necessary, simplifying everyday measurement tasks.

RT-ZS10L Includes: Instruction Manual (1); Spring Tip 0.5 mm (1); Solid Tip 0.5 mm (1); Ground Blade (1); Marker Bands 4 colors (1); L-In Adapter (1); Ground Lead 6 cm (1); Ground Lead 12 cm (1); Ground Lead 90 Degree 5cm (1); Ground Lead 90 Degree 10cm (1); Power Supply (1); Picohook black (1); Picohook red (1); 2.5 Protection Cap (1); self adhesive Cu Pad (2 x 2 cm) (1); Probe (1); Y-Lead Adapter to 0.8mm sockets (1); Z-Ground (1)

*Note: Requires 5:1 attenuation factor setting on oscilloscopes with 1 Megohm input.